YT1DL Only Digital

N1MM Contest logger and GenesisSDR settings

It is possible to set world famous contest logger by N1MM to work with GenesisSDR. It is little bit tricky but I put it all together with my G59.

First we need to set virual com ports. In this case we need three couples !! You can do it via N8VB Virtual COM port software or using some of newer packages like Virtual Serial Port Driver by Eltima or VSP Manager by K5FR (my choice). First virtual pair is for PTT control, second for CAT control and third for virtual N1MM keyer or CWX.

 
 

Next, GSDR settings. In CAT control settings menu set two com ports for CAT and PTT control ( see picture). If you set virtual ports like me you will put COM16 for PTT controll and COM17 for CAT. Notice: Change CAT ID to "Kenwood TS-2000" !!!

 

In DSP/Keyer menu set COM18 as Keyer port (DSR as DOTT/PTT) and remove "check" in front of Lambic option.

 

At last, in Genesis config menu remove "chack" in front of lambic option to ! (Internal G59 keyer disabled).

 

Now, tricky part. M1MM settings. We need to prepare settings for three N1MM com ports. In N1MM settings menu pik "Hardware" tab. And set COM6, COM7 and COM8 by picture. Do not forget to check CW for COM6 and COM8 and Kenwood for COM7 (N1MM do not support SDR1000 by default so we will use Kenwood CAT emulation). Click at "Set" switch for every of used ports and do detail setting also by pictures under. I will not explain this setting because it will be to complicated for my English :-) so just copy this settings to your N1MM logger.

 
 
 
 

This would be all. I try this setup an my Windows 7 and Windows XP without delay or hiccups. I hope this text is clear and simple as I want it to be.